[. . . ] GENERAL FEATURES Remove the appliance from the packaging, turn upside down and rest on the polystyrene. Check that neither the appliance nor the power cable has been damaged in any way during transportation. [. . . ] This will leave visible sectors which correspond to the periods of operation. When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket). - To change the programming, move the teeth back into the initial position and set the new periods of functioning. - If you want to make the appliance operate without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning the switches off, you must also unplug it from the mains to avoid continued operation of the timer. MAINTENANCE Before carrying out any operation on the radiator, unplug from the electric mains and wait for it to cool. If necessary remove concentrations of dirt using a vacuum cleaner (fig. IMPORTANT - Never use the radiator near a bath, shower, basin or swimming pool. - When you start the radiator for the first time, leave it operating at maximum power for at least two hours. During this operation, ventilate the room well to eliminate the "new" smell emanating from the appliance. - It is normal for the appliance to emit a squeaking noise when turned on for the first time. - The appliance must never be placed immediately under a fixed mains socket. - This radiator is filled with a precise quantity of oil and repairs which require it to be opened must be carried out exclusively by the manufacturer or an authorised service centre. - Do not use the appliance in rooms with a base area of less than 4 m2. [. . . ] As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. Den kan överlämnas till lokala myndigheters avfallssorteringscentraler eller till en återförsäljare som ger denna service. [. . . ]